Putters

The Toura Golf Japan CS Putter, is a center shafted - compact/wide head design and is intended for skilled players. It has an unshafted head weight of 365 grams and the face is fully milled. This putter is made in Japan, with each head carefully constructed by craftsmen in Ichikawa-cho (Himeji), the birthplace of Japanese golf club production. The entire putter head is completely blank with no logos, branding or markings of any kind.

These heads are hand finished one by one and are intended to have a one of a kind worn and roughed up antique look. This technique also allows for the finish to both darken and lighten over time accenting both the under and overtones in the finish. 

The TG Tour-Proto P2 Putter is designed for both stability and consistency. The P2 is fully milled from a solid block of premium 303s.s and comes with a lower gloss matte finish. The putter face is fully milled with a circular precision pattern and features removable weight on the sole. This putter is available in left and right handed versions, including both insignia and blank models. 

 The Tour-Proto P3 Putter has a classic tour design.  The face is fully milled with a beautiful honeycomb pattern and it features two removable weights on the sole of the head. 

The TG Tour-Proto P5 is a one of a kind putter with interchangeable face plates. The body of the putter is milled from a solid block of premium 303ss. However, the face plate on the putter is interchangeable and each putter comes with several faceplates made out of different metals, which change the weight and feel of the putter. 

The Gen. 2 TG S-Spec wedge is a true work of art. Each head is forged and finished by hand in Ichikawa (Himeji) Japan from soft S25C Japanese steel. The heads have an aggressive leading edge, mid bounce configuration, and are slightly rounded with a multi cut sole and heel. This wedge is generally more suited for mid and low handicappers looking for that premier Japan forged feel.

Building on the success of the Gen 1. head and player feedback, the Gen 2. A-Spec is sure to be a new favorite among wedge purists. Forged from soft 1020 carbon steel, this wedge provides a soft feel at impact and enhanced milling for exception spin and control.

With the introduction of the Gen 2. A-Spec, this line has been expanded to include a left handed model. Forged from soft 1020 carbon steel, this wedge provides a soft feel at impact and enhanced milling for exception spin and control.

Forged from soft S20C, the C-Spec wedge is a true work of art. From the rear and at rest in the bag, this wedge is highly stylized with extreme precision milling and a high polish chrome finish. However, at address, the wedge has a classic look with very little distractions. 

The Toura Golf F-Spec wedge is one of our most popular and best selling wedges. With a very versatile grind and standard bounces, these wedges are designed to suit a wide variety of players. These are also our most forgiving wedges. 

The Toura Golf F-Spec wedge is one of our most popular and best selling wedges. With a very versatile grind and standard bounces, these wedges are designed to suit a wide variety of players - available in both blank and insignia versions. 

Straight from the foundry, these heads come as raw, blank and unfinished wedge heads.

In the TG Custom Studio we make true modern works of art. 

The TG A-SPEC is a 1020 forged carbon steel wedge that is designed for those that appreciate an ultra modern/ minimalist look. This wedge is currently not in production and was replaced by a newly designed Gen 2. model. 

This wedge features aggressive face milling, a lower bounce configuration and sharp leading edge. It is made for skilled players with aggressive attitudes. This wedge is currently not in production and was replaced by a newly designed Gen 2. model. 

The Toura Golf KCM-Cut is a classic muscle back iron which is geared towards discerning players looking for exceptional feel and performance. The KCM-Cut MBs are forged by Kyoei Golf Industries from a renowned single piece mold. From there, they are hand ground in Japan to our exact specifications. 

The Toura Golf JCB-Cut irons are forged by the legendary Kyoei Golf Industries and are hand ground and finished in the famed Himeji region of Japan. These are some of our finest CBs and are geared towards players looking for top of the line equipment. As one would expect from a true players CB, these irons have a compact head shape, thin top-line and a lower offset. 

Forged in Japan, the JDM Combo set combines our JCB head with an enhanced MB head to create a very playable combo set. 

The Gen 2. Split-Step CB (SCB-1) are players irons. They have a compact head, relatively thin top-line, and a very low offset. Unlike the KCM-Cut (MBs) and the JCB (CBs) which prioritize feel and workability, the Split-Step CB places a greater priority on distance and launch. 

The new Gen 2. SCB-1 model is less forgiving than the original Gen 1. Split Step CB, with a slightly smaller head and lower offset. We consider this to be a 'players distance' iron. 

The TG Split Stepped CB is forged from soft 1020 carbon steel. The stepped cavity design is intended to blend the workability of a muscle back with the added forgiveness of a cavity back, 'splitting' the difference between the two styles. Available in both blank and insignia versions.  

Gen 1. model was replaced by a Gen 2. version in 2024, with reduced offset and slightly smaller head. 

The Toura Golf LH MBs are forged from soft 1020 carbon steel. They feature a medium gloss black finish with light brush marks. These MBs look and feel exactly as they should. With a relatively compact head shape and thin top-line, these irons are meant for a discerning player looking for a very playable MB option. Available in both blank and insignia versions.  Original models simply went by TG LH-MB, which was updated to the 'LMB-1' model line in 2024 which is used for both the left handed an. 

The Gen 2. MBs look and feel exactly as they should. With a relatively compact head shape and thin top-line, these irons are meant for a discerning player looking for a very playable MB option. 

The RH version has been replaced by a new Gen 3. version in 2024, under the model line SMB-1. The Gen 3. model keeps the clasic head shape of the Gen 2. version, but features a slightly lower offset. 

The Toura Golf Blank K-Cut MB (Pro) Irons are forged and hand finished, one by one, in Ichikawa Japan - the birthplace of Japanese golf club production. Forged for Toura Golf by Fujimoto Golf, this model is a favorite for small batch drops and custom studio editions. 

The Toura Golf Blank C-Cut MB Irons are forged and hand finished, one by one, in Ichikawa-cho (Himeji) - the birthplace of golf club production in Japan. These are some of our finest MBs and are geared towards players looking for top of the line equipment. Aside from the finish, when compared to the K-Cut MBs, the C's have slightly more offset for added forgiveness. This model is no longer in production and was replaced by the new K-Cut design. 

There is nothing entry level about our entry level MB. Originally designed for maximum spin, with milling on the club face. These irons are no longer in production and were replaced by a newly designed Gen 2. model available in both RH and LH options. 

True Temper shafts come stock in most clubs. 

Project X shafts available upon request.

Steelfiber shafts available upon request.

The Toura Golf Cross-Current Grip comes stock on all built clubs and is available in standard and midsize options. 

Our standard stock ferrule is black with two gray/ chrome accent rings. Our stock ferrule is slightly smaller than our upgrade options which measure 1'. Our stock ferrule is designed to match the TG stock grip. 

Custom ferrule upgrades available on most wedge and iron models.